Please wait while the page loads...

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. If you check engine light is shining, we recommend that you pull over and contact Richmond BMW Midlothian to assist imply if your vehicle is safe to drive in or if we recommend a tow truck. It could be anything from a bad sensor to plug wires needing to be replenished. Since every check engine code has its own level of severity, it is not easy to predict how several miles you can drive with the warning light on.

Is it safe to drive your 2013 BMW 528i with the check engine light on?

This question is not very easy because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is typically indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more hazardous problem. If the check engine light is flashing, this means that there is a hazardous issue and it is recommended to service your BMW 528i expeditiously. Call the experts at Richmond BMW Midlothian by dialing 8043618758 so you can describe the issues. Or reduce your speed and bring your 2013 BMW to our certified mechanics as soon as possible.

2013 BMW 528i Check Engine Light Flashing

Although there are many achievable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are many modern causes including something as plain as a loose gas cap. Other modern reasons for a Check Engine Light are damaged oxygen sensor, a malfunction with the fuel injection system, faulty head gasket, dirty mass airflow sensor, faulty emissions control part, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the BMW Certified Technicians and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your BMW issue was fixed.

Every 2013 BMW 528i was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its critical systems. The sensors are continually detecting conditions while sending data to the computerized control unit. If the computerized control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what specifically is erroneous nor what to do about it. That’s where we come in; Richmond BMW Midlothian provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Notably Qualified Service professional.

2013 BMW 528i Check Engine Light

A blinking light implies that the problem is dangerous and if not taken care of quickly may result in abundant break to the vehicle. If the check engine light in your 2013 BMW 528i starts blinking, that means that the problem needs quick attention and your BMW should be brought in quickly. This flashing light commonly indicates a strict engine misfire allowing unburned fuel to be ejected into the exhaust system. There it can instantly increase the temperature of the catalytic converter to a point where damage is feasible, requiring an pricey repair. Some owners ask if spark plugs cause the check engine light to flash? This can specifically be the cause. A destructive, erstwhile or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive experts at Richmond BMW Midlothian hastily by calling 8043618758. If the problem is ignored or you continue to commute, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very fancy repair.

What Does the Check Engine Light Mean?

One of the most constantly misunderstood lights or indicators in your 2013 BMW 528i is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a mixture of things for your 2013 BMW 528i. Some of these include controlling engine speed, shifting automatic transmissions ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can indicate a mixture of different things. It can be as regular as your gas cap being loose or as perilous as engine knocking. If your check engine light is on in your 2013 BMW 528i, contact Richmond BMW Midlothian. Contact Richmond BMW Midlothian today! Our BMW service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is glaring.

What could cause the check engine light to come on in a 2013 BMW 528i?

When your check engine light comes on, this could be as easy as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a serious problem that could cause serious damage to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow commonly means something less serious but a flashing check engine light indicates that your vehicle’s engine is in serious trouble and service is decisive expeditiously. If your check engine light is flashing in your 2013 BMW 528i, we immensely advocate not to drive the vehicle and schedule BMW service straightaway. Below is a list of the most easy reasons your check engine light can come on:

  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2013 BMW 528i’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is commonly caused by neglected maintenance, which is why Richmond BMW Midlothian offers a complimentary multi-point inspection with every BMW service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 BMW 528i will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your automobile may run at a higher temperature, too, which can cause other problems from overheating.
  • Your 2013 BMW 528i has a vacuum leak. Every BMW 528i has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower intrusive emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to immense heat or extreme frigid.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak havoc on your 2013 BMW 528i if it’s not installed properly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound simple, bring your 528i to BMW and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts authentic place might cost a scant bit more but could save you money from having to get small work and damage caused by small installation work corrected.
  • One of the most fair and many cause is that your 2013 BMW 528i gas cap is loose, damaged or missing. The gas cap for your 2013 BMW 528i serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is classical or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't lavish. If your check engine light turns on instantly after you put gas in your 2013 BMW 528i, authentic thing you should check is to make convinced the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less persuasive when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 BMW 528i's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to opt for the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a automobile to fail an emissions test.
  • New Spark Plugs or Plug Wires are decisive for your 2013 BMW 528i. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or classical, you will experience small performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, dominant to more lavish repairs.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your BMW 528i is what determines how much fuel is decisive to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to understandable changes, like altitude. If your BMW 528i is having trouble starting, idling rough or has a precipitous change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • The battery is small or dead. The battery in your 2013 BMW 528i is every necessary. Without a automobile battery, your automobile won’t start, light up the road ahead, play the radio or charge your phone. Today’s automobile batteries last much longer than they did a lot decades ago, and they don't genuinely require maintenance. The price of a new one depends on the type of BMW you drive, but check our existing service coupons and specials.

2013 BMW 528i Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard instantly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your 528i. There are hundreds of definitive codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling basic diagnostics will give you conducive knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, convenient and cooperative vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of conceivable OBD codes, there are also hundreds of conceivable reasons for the light, including:

  • O2 Sensor
  • Computer output circuit issues
  • Old Battery
  • Transmission issues
  • Bad Spark Plugs
  • Loose Gas Cap or Missing Gas Cap
  • Fuel and air metering systems problems
  • Emissions controls issues
  • Ignition system faults

This is why it is vital for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out expeditiously by a certified BMW mechanic. If the engine light comes on due to a harsh concern, you risk damaging your car further by not repairing the issue right away. Call Richmond BMW Midlothian at 8043618758 today or schedule your check engine light service online today!

Will the check engine light reset itself?

The check engine light on your 2013 BMW 528i will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going factual, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 BMW 528i light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Richmond BMW Midlothian so the light and code can be double-checked and reset.

Check Engine Light Service 2013 BMW 528i

What do you do when you’re driving along in your BMW 528i and quickly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most BMW owners, your heart sinks a small because you have small idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 BMW 528i checked as soon as conscious. Ignoring that warning could end up causing primary damage to costly engine components.

When your 2013 BMW 528i's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electrical control system that it can’t honest, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is learn with an electronic scan tool that is used by our BMW auto repair mechanics at Richmond BMW Midlothian. There are also a number of relatively good code readers that are designed for do-it-yourselfers, should you prefer that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced experienced to indicate the issue and repair it.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not accurately tightened to a more hazardous failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it terrific to get the acceptable code reading and diagnosis. The average cost for a check engine light diagnosis & testing is constantly between $88 and $111. The terrific news, Richmond BMW Midlothian offers complimentary multi-point inspections and free diagnostics, in most cases, to help determine the cause of your check engine light.